How much do you know about the galvanizing process of chain link fence

The chain link fence has good corrosion resistance. The galvanizing process of chain link fences is usually dyed on the galvanizing process layer of steel chain link fences. Therefore, the surface not only has an appearance similar to aluminum oxidation dyeing, but also has the high hardness performance of steel, and has a wide range of applicability. The galvanizing process for chain link fences is simple and easy to operate, and can be mass-produced. The chain dyeing process of zinc chain net plating is different from the pure physical adsorption of aluminum and aluminum alloy anodic oxide film, and it also has the functions of ion adsorption and chemical reaction.

The entire surface of the steel is protected. Whether in the concave tube or in other corners where it is difficult to enter the coating, the molten galvanizing can be easily and evenly covered. The hardness value of the chain link fence mesh galvanized layer is greater than that of steel. The hardness of the upper layer is prone to collision and depression.

In the corner area, the galvanizing layer is usually thicker than other places, and has good toughness and wear resistance. Other paints in this corner are usually difficult to apply and easily damaged, so they usually need to be maintained.